Ford began its touchscreen journey with its MyFord Touch technology, which was announced in January 2010. Initially incorporated into the Ford Edge vehicle, MyFord Touch continued to rise after that and never looked back. Although there are many beautiful things you may do with it, your only duty is to keep it clean.
Well, then you might be asking yourself how to clean my ford touchscreen. In short, you only need a microfiber cloth, your preferred cleaning solution such as the vinegar-distilled water mix. With the right swipes around the Ford touchscreen, you will be able to operate the clean screen smoother than ever.
However, this isn’t the only information that you should know when cleaning your screen. There are specific steps you must take to avoid causing damage to it. So, without further ado, let us begin!
What Is Ford Touchscreen Made Of?
Before we get into the specifics of cleaning the Ford touchscreen, it’s crucial to understand what we’re up against. What exactly is a Ford touchscreen composed of? A Thin Film Transistor Liquid Crystal Display is used to make it. You’ve probably heard of the acronym “TFT LCD.”
Overall, these types of displays are used in mobile phones as well as touchscreen laptops. So there isn’t any difference between the display on your phone and your Ford touchscreen. Furthermore, they are susceptible to some substances and might be harmed by them. As a result, selecting the proper cleaning solution is necessary.
Similarly, the material that the cleaning cloth is made out of always plays a significance. Don’t worry, we will also talk about the prospects to follow and the things you need to avoid with this type of display. So stay tuned with us.
How to Clean a Ford Touchscreen: Step-by-Step Guide
Let’s get into the business end. While there are many ways to clean any touchscreen, below we’ll teach you how to do it the most efficiently. So let’s check it out!
Step 1: Turn off the display
Ensure that the screen in your car is off before proceeding because you don’t want to mess with any pixels that are currently firing. By turning off the screen, you may also work with a dark surface, which makes it easier to see filth, dust, and grime.
Step 2: Take a microfiber cloth
To clean your Ford touchscreen, use one of these soft, dry wipes. Since they are non-abrasive, they are perfect for automotive LCD panels. A high-quality microfiber cloth can successfully remove most screen dust and dirt once it has dried.
When there is a lot of dirt to be cleaned, you might need to get your hands on the solution.
Step 3: Swiping
You can either use a microfiber cloth that has been dried or one that has been lightly soaked in your chosen solution (50/50 vinegar-distilled water mix). Circularly clean the screen with the microfiber cloth as you go from top to bottom.
Don’t forget to avoid pressing too firmly as this can harm your LCD screen. Utilize the microfiber cloth once more to wipe away any lingering smudged oils.
Which Cloth Should I Use To Clean A Car Touchscreen?
Your touch screen can only be cleaned safely with a microfiber cloth. They have incredibly tiny fibers in them, so your touchscreen won’t be scratched. Additionally, the microfibers draw dirt and oils, removing them from the screen of your device rather than rubbing them around.
On the other hand, the material you should avoid is paper towels. They are simply bad for the screen. These soft microfiber cloths, in contrast to paper towels, effectively clean your touch screen’s delicate glass without damaging the screen. The touchscreen of your car should only require a couple of fast wipes with a microfiber cloth to be clean.
What Cleaning Solution Should Be Used?
One of the most frequent things to ask by anyone willing to clean their Ford touchscreen is the solution they should use. While most people will say that just water would do just fine, it always isn’t the case. Two options are available for effective cleaning;
● Using rubbing alcohol with distilled water
● Using Vinegar with distilled water
Let’s dig into these two options a bit.
Rubbing Alcohol With Distilled Water
It’s quite simple to make this spray for cleaning screens. Simply mix one part distilled water and one part rubbing alcohol in the spray container. It can now be used after being capped and shaken briefly. That’s it, your solution is ready for deep cleaning.
Vinegar and Distilled Water Mix (in 50/50 ratio)
If the screen is heavily polluted with surface dirt or other contaminants, a very little amount of weak acid, such as vinegar, might be mixed with the distilled water. Wiping should be done vertically and horizontally with a somewhat moist towel. Any leftover moisture should be wiped away with a dry towel.
However, keep the amount of vinegar to a minimum because too much might be detrimental to the screen. Similarly, clean a TFT display only after the power has been switched off, and use extreme caution.
What Not To Do When Cleaning Ford Touchscreen
To prevent unintentionally damaging the screen, a few things must be avoided when cleaning. The following are the behaviors you should avoid;
● When cleaning TFT LCD screens, stay away from harsh products like paper towels and newspaper.
● Avoid using glass cleaners that contain alcohol or ammonia since they could damage the TFT LCD.
● Don’t put too much pressure while cleaning. Simple gentle wipes should do the trick.
We hope you have the answer to the question, “how to clean my Ford touchscreen?” If you think about it, the cleaning part isn’t that hard. Simply take a microfiber cloth and gently rub it on the screen.
However, when there is excess dirt then you need to go for a solution like vinegar and rubbing alcohol. Yet, keep in mind that they do need to be in small amounts and need to be mixed with water.
Lastly, the only thing that will prevent you from treating your Ford touchscreen badly is keeping in mind that it’s only a sensitive plastic. So treat it the way a sensitive plastic should be treated.